HI _ TECH MACHINERY CO.


info@htm.com.pk	9221-5393155-6	Search
info@htm.com.pk



	Routers Plasma Waterjet Lasers 2000 series knife system spin CA HSLC HSLE BSpin DIE Cutting Laser Blade Bending Needle Detectors Thread Sucking Fusing Press sand Blasting Flims Foam Cutting advertisement equipments Softwares

2000 Series CNC Laser
		MultiCam’s 2000 Series Laser machine is a versatile platform for full sheet cutting. The machine is available in 60 inch and 80 inch widths and lengths up to 240 inches. It is available in three power ranges: 100, 200 and 400 WATT. The 2000 Series flying optic system is fully collimated for uniform beam quality in the near and far field. MultiCam’s 2000 Series Laser machine can cut as well as raster engrave in a variety of materials. Rigid all-steel frame insures rigidity and structural integrity under the most demanding conditions. Digital AC brushless servos, high precision planetary gearboxes and helical rack and pinion allow the MultiCam 2000 Series laser to achieve high speeds without sacrificing accuracy.

2000 Series Standard Features:
		No machine offers more standard features than the MultiCam. Welded, stress relieved and precision machined steel plate/box frame moving gantry construction insures rigidity and structural integrity. A gantry clearance of 1.875” (48mm) is standard. Lasers: Synrad Firestar 100, 200 and 400 watt (water cooled) The MultiCam 2000 Series Laser system comes standard with a high end ying optics system with 2.5” (63.5mm) and 5” (127mm) available optical focal lengths (5” is included standard). Included in the system is a red laser diode pointer to aid in the setup of the optics and for material alignment. A beam collimator is used to insure a consistent beam diameter thru the full range of motion. With the capacitive height sensing option, the Z-axis will react to material height changes on the y while cutting. This system will work with conductive materials only. (Non-conductive materials can be cut with the addition of an optional shoe.) Yes, you do get Ethernet, Automatic Tool Calibration, and one of the easiest to use hand held interfaces for no additional cost!

		EZ Control Integrated Material Library When you change material type or thickness many parameters such as federate, pierce delay, pierce height, etc. all need to be adjusted. MultiCam has made this process simple by integrating all of these cutting values into a simple to use menu driven database on our hand held controller. The user simply selects material type and thickness, and all of the settings are adjusted automatically. Tabletop Options A slat style cut bed is provided standard on the 2000 Series Laser. The slats are one inch tall, 4pt steel rule on 4 inch centers. Each slat has a radius on the edge to minimize flash back. The slat material provides a rigid base and replacement material is readily available. Fume Extraction The MultiCam 2000 Series Laser system uses both above the material and below the material fume extraction for optimum fume removal. Fume extraction above the material is collected thru one 2” diameter hose at the cutting head and is powered by its own 1 HP regenerative pump. This assists with collecting fumes during initial piercing and raster engraving. The main material fume extraction collects the fumes under the cutting surface. A 16 inch port is provided at the rear of the table for connection to a fume extraction system. Cut Gas Delivery System Low-pressure compressed air delivery is standard on all systems. A high-pressure cut gas delivery system is included with the capacitive cutting option. Standard Surface Mapping To achieve the best cut quality, it is important to keep a consistent distance between the cutting head and material. MultiCam’s surface mapping feature uses a sensor to take height measurements in a grid pattern to create a 3D surface of the material. The controller then takes the 2D file andprojects it on to the 3D surface by converting the G-Code or HPGL job file into 3D splines.

MultiCam EZ Control
	Handheld keypad interface allows operator to set job parameters, jog the machine, perform system tests and download jobs from a remote computer system Standard shape library with automatic array. Ethernet and serial communications interface are available to the host computer system Productivity Software Suite is included Bar-code scanning interface and 2D part digitizing are available options
Specifications:
		Slew speed: 800”/min (0..33 M/sec) in X axis, 2400”/min (1m/sec) in Y axis Cut speed: 800”/min (0..33 M/sec) Repeatability: +/- 0.001” (0.025 mm) Raster speeds up to 1800”/min (0.8 M/sec) using up to 256 gray scale with up to a 1200 DPI resolution. Precision servo drives with helical rack and pinion and linear ball bearing guide ways on the X and Y-axis Ball lead screw and linear ball bearing guides ways on Z axis. Gantry clearance 1.875” (48 mm) Z axis stroke 3.25” (82 mm) Y axis stroke 60” (1524 mm) and 80” (2032 mm) X axis stroke 50” (1270 mm), 100” (2540 mm), 120” (3048 mm),144” (3658 mm), 168” (4267 mm), and 240” (6096 mm)